Home / Brake shoe kit for wheel brake type S 3006-7 RASK und S 3006-7 SK, brake size 300x60mm, for one axle
consisting of brake shoes, tension springs, clamping pin, clamping spring, for one axle (2 wheel brakes left + right). Read more...
Part no. OLD 09.801.03.81.0
Part no. NEW 4018194
| Wheel brake type (1) |
S 3006-7 RASK and S 3006-7 SK |
| Brake shoe diameter |
300mm |
| Brake shoe width | 60mm |
| Casting number brake pads |
03.092.11.21.0 |
Scope of delivery for one axle (2 wheelbrakes) - see illustration
4x Brake shoes (2x secondary shoe, 2x primary jaw)
2x Tension springs
2x Clamping spring
4x Clamping pin
For axle type (2)
CS 2106
CS 2306
CS 2506
CS 3006
DS 2106
DS 2506
DS 3006
DS 3206
DS 3606
DS 4506
Suitable for replacement part identification number (3)
| XX.XXX.373.XXX (OLD) | XX.XXX.374.XXX (OLD) | 827040 (NEW) |
IMPORTANT INFORMATION: The manufacturer BPW has been sold (AL-KO).
Service manual, installation / brake shoe replacement
Installation instructions
Caution! Brake shoes are a safety element of the braking system. Following the replacement of the brake shoes, the entire braking system must be fine-tuned. The assembly and replacement of brake shoes may only be carried out by an authorized specialist workshop.
BPW Change of brake shoes
Adjusting the BPW brake system. Following the replacement of the brake shoes, the entire braking system must be fine-tuned.
Use only parts and accessories from AL-KO/BPW. Original parts vs. replica.
